Manual Lawn Mowers

Steel frame side wheel type mowers having six blades cutting cylinder, rubber tyred wheels , complete with grass box & handle etc.

SIZE 12"(300 MM)
SIZE 14"(350 MM)
SIZE 16"(400 MM)
SIZE 18"(350 MM)

Push Lawn Mower in 12, 14, 16 and 18 Inch Sizes

A push lawn mower is the simplest machine you can own: no engine to start, no cable to untangle, just a six-blade cylinder that turns as you walk. Unison Engg. Industries manufactures steel-frame push mowers in Jalandhar, Punjab, in four sizes so you can match the cutting width to the size of your lawn.

Push Lawn Mower Specifications

• Sizes: 12, 14, 16 and 18 inches


• Cutting action: six-blade cutting cylinder at 51 cuts per metre


• Material: mild steel with a powder-coated finish for corrosion resistance


• Wheels: rubber-tyred side wheels


• Supplied with: grass box and handle


• Drive: manual, no fuel or power needed


• Packing: mower and grass box in corrugated cartons, handle in an HDPE bag


• Export payment terms: L/C or T/T

Why Choose a Push Mower

A push mower suits lawns where a motor is more machine than the job needs. It runs quietly, costs little to maintain and starts every time because there is nothing to start. The cutting cylinder shears grass against a fixed edge, which keeps the finish tidy on lawns mown at regular intervals. Rubber-tyred wheels let it roll smoothly over turf, and the grass box collects clippings as you go, so there is less raking afterwards. It is also a sensible second mower for edges and corners.

Which Size Is Right for You?

• 12 inch: compact, for small lawns, narrow strips and tight corners.


• 14 inch: a balanced choice for typical home lawns.


• 16 inch: fewer passes on medium lawns, with a bit more effort per push.


• 18 inch: the widest size, best for open lawns where you want to finish quickly.

If you are unsure, tell us the area you mow most often and we will suggest a size.

Related Manual Mowers

If a push mower is not quite right, look at the rest of our manual family: the Junior Wheel Type Push Mower, the Steel Frame Wheel Type and the Mercury Roller Type Push Mower with Ratchet. Roller-type lawn mowers in 12, 16, 20 and 24 inch sizes use a ten-blade cylinder for a finer finish.

Care Tips for a Longer Life

Mild steel is strong but will rust if left damp. Wipe the frame and cylinder after mowing, dry the mower before storage and keep it indoors or under cover. Oil moving parts lightly, and check that the blades meet the fixed edge evenly; a quick adjustment keeps cuts clean. The powder-coated finish helps resist corrosion, but chips in the paint are worth touching up.

Using a Push Mower Well

Mow when grass is dry and no taller than the mower can comfortably take; if the lawn has grown long, raise the cutting height if your model allows it, then lower it after the first pass. Push at a steady walking pace and overlap each pass slightly. Mow in a different direction each time to avoid ruts and to keep the grass growing upright.

Supply Details

Unison Engg. Industries is a manufacturer, supplier and exporter of push lawn mowers, delivering across India and worldwide. Export orders can be settled by L/C or T/T. Share your preferred sizes and quantities, and our team will confirm specifications and pricing.

Request a Quote

Tell us the size and quantity you need. Unison Engg. Industries will respond with pricing and delivery details. Contact us today to order your push lawn mowers.

ROLLER TYPE PUSH MOWER

10 BLADES CUTTING CYLINDER

CHAIN DRIVE

COMPLETE WITH GRASS BOXSIZE  ARE AVAILABLE IN 12,16,20,24 INCHES

Roller Type Lawn Mower for a Smooth, Even Finish

Look at a well-kept cricket outfield or bowling green and you will notice the finish before the grass: smooth, even and level. A roller type lawn mower is built to deliver that kind of result. Unison Engg. Industries manufactures roller type mowers in Jalandhar, Punjab, with a multi-blade cutting cylinder and a roller behind it that supports the machine and presses the turf as it cuts.

Key Specifications

• Sizes: 12, 16, 20 and 24 inches


• Cutting cylinder: ten blades


• Cutting ratio: 51 cuts per metre


• Cutting height: 3/4 to 2 inches


• Body: mild steel, powder-coated


• Drive: manual push, with aligned gear and chain

Why a Roller Gives a Better Finish

In a roller design, the rear roller helps hold the cutting cylinder at a steady height above the ground, and an aligned gear and chain drive keeps the cylinder turning smoothly. Together they produce an even cut, which is why roller mowers are the usual choice for sports turf and ornamental lawns, where appearance matters.

The Roller Family at Unison

The manual roller type lawn mower is the core model, but the roller concept runs through other products in our range:

• Mercury Roller Type Push Mower with Ratchet and Golfer Roller Type Push Mower for manual use.


• Roller-type power mowers with multi-blade cylinders driven by a 1 HP or 2 HP electric motor, or by a petrol or diesel engine.

Where Roller Mowers Are Used

Roller type lawn mowers are widely used in agriculture, horticulture, landscaping and similar settings, from institutional grounds to private gardens. They reward regular mowing: the shorter and more frequently the grass is cut, the better a cylinder-and-roller combination performs. For long, coarse or weedy growth, a rotary slasher is the better machine.

Roller Type or Push Mower?

Both are manual, and both suit regularly mown lawns. Push mowers in 12 to 18 inch sizes use a six-blade cylinder and rubber-tyred wheels, and they are a good fit for compact home lawns. Roller type mowers add a ten-blade cylinder, wider size options up to 24 inches and the roller finish, which suits ornamental lawns and sports turf.

Care and Adjustment

Keep the roller and cylinder free of packed clippings, since built-up grass can stop them turning freely. Check the gear and chain for slack and lubricate them lightly, and keep the cutting cylinder set so the blades just touch the fixed edge. Store the mower indoors or under cover to protect the powder-coated body.

Ordering from Unison Engg. Industries

We manufacture, export and supply roller type lawn mowers from Jalandhar, with customers across India and overseas. Tell us the size you need (12, 16, 20 or 24 inch), the quantity and your destination, and our team will quote and advise on packing and delivery.

Request a Quote

Contact Unison Engg. Industries today for pricing on roller type lawn mowers, and tell us how you plan to use them so we can recommend the right size.